If you were wondering how to dye your hair silver or grey at home, you’ve come to the right place!
Silver grey hair had been a goal of mine for a little while, and after much experimenting and finally achieving the look I wanted, I thought I’d throw together this little guide for those of you that are interested in doing the same thing.
Disclaimer: I am not a hair stylist or professional. This guide is used for reference only and contains steps and products I’ve used to achieve silver hair without a salon.How to dye your hair silver at home
Before you begin…
I’ve never had to do as much up-keep on my hair as I do now that it is silver.
It’s important to know ahead of time that silver hair is a pretty demanding hair colour, so make sure you’re ready to take on the responsibility before moving forward!
If you’ve never dyed or bleached your own hair before, I recommend getting this done at a salon so you can be sure that it’s done properly with minimal damage.
You can even take notes and ask questions if it’s something that you’d like to attempt in the future. If you’re ready to take the plunge and do it on your own, keep reading.
Bleach, bleach, bleach!
Unless you were born as a natural level 10 shade, you simply can’t achieve this colour without bleaching your hair.
The silver hair colour simply won’t take, so starting with super light hair is the first step in achieving this grey hair shade.
Take a look at this chart below to determine your current hair colour level:
Depending on your natural colour, you may have to do the lightening process multiple times.
This process shouldn’t be taken lightly. You can seriously damage your hair or cause bleach burns on your scalp if you mess up or don’t do proper research first.
It’s important that your hair reaches the lightest possible level before attempting to go silver. Your hair should should resemble that of the inside of a banana peel.
Be aware here that you’re going to be stripping down the colour of your existing hair, which can leave it brittle.
I suggest stocking up on some deep conditioning treatments, Olaplex, or leave in conditioners to aid in the repairing process and to leave your hair shiny instead of dull and dry.
Tone it, baby!
After your hair is lightened, it might look quite yellow and unattractive. If it’s leaning more on the orange side, it’s not yet light enough.
The toning process is what will kill those yellow hues and killing those hues is a must for this silver/grey look.
You can use toner, dye, or both depending on your taste. Let’s talk about toner first.
You’ll want to go with a purple or violet-based toner, like the Wella T18 Lightest Ash Blonde toner. I always use this stuff with a 5 or 10 volume developer instead of the 20 they recommend on the bottle, simply to save my hair from even further damage.
With a 5 of 10 volume, it’s not going to lift the color anymore, but instead, just deposit the color/toner onto your hair.
You will apply it using the bowl/brush technique and following the instructions that come with it.
Leaving this on your head for about 20-30 minutes will do the trick. Keep checking your hair throughout the process.
Another option, although not as permanent, is to try a semi-permanent DIY toner that will not cause any damage to your hair as it doesn’t need a developer, note that it doesn’t have the same staying power.
That’s usually all there is to it and toning your hair may just get you to the grey shade that you wanted without additional dye, but if you want something darker or more vibrant, a silver/grey colored dye is the way to go instead of a toner.
Note that if you used my DIY toner tutorial, it acts as a semi-permanent dye and you don’t need to do anything else!
Prepare to Dye!
Alright, so as I said above, sometimes you don’t need to add additional dye after bleaching and toning your hair. You can make this judgment for yourself based on your results.
I’ve had toning results that didn’t exactly get me as silver as I would have liked, so added a semi-permanent dye on top.
You can even skip toning entirely and move directly towards a violet based dye.
I’ve tried a couple of direct silver dyes, and the best one so far has been the Pravana Chromasilk Vivids in Silver. It is a longer lasting semi-permanent colour which requires no developer, which means no damage to your hair as there is no peroxide.
You will apply this directly from the tube with a brush and bowl just like the bleaching process.
There are a couple of ways you can do this depending on the shade of grey you want to achieve. You can empty the entire tube into your bowl and apply it as is for a darker steel grey colour, or you can dilute it (like I do) for a lighter silver colour.
To dilute it, first, fill your bowl with a bunch of cheap conditioners and then apply some of the Chromasilk colors.
I added about half of a tube to 3/4 a cup of conditioner for my light silver shade. Mix it up and apply it just like you would with the brush.
Silver Hair Care Tips
Silver hair is probably one of the most difficult colours to achieve and keep. It tends to fade rather quickly, so you’ll want to stock up on some products to help maintain the shade.
One of my favorite tricks is to use this Roux Fanci-Full Rinse in Silver Lining in between dye jobs. It is a temporary hair color rinse that you apply to damp hair and it lasts until you shampoo it out.
If you’ve trained your hair to only need a washing every few days, this is a great product for a little ‘pick-me-up’!
Shampoo your hair every few washes with a purple-based color-correcting shampoo like Shimmer Lights by Clairol or if you’re in Canada, the Ice Cream purple shampoo you can get at Shopper’s Drug Mart is AMAZING.
This will help to keep the yellow tones at bay while your colour fades. If they start creeping up on you, try mine at-home DIY toner.
To keep your hair looking healthy, use a deep conditioning treatment once a week. Remember, the less you wash your hair, the longer the color will last.
Tackle those roots! You don’t want to let your roots grow more than a centimeter because you will be causing more hassle for yourself.
It’s much easier to bleach regrowth that is this length because the risks of unwanted banding (seeing a line where the new bleach/old bleach begins) is lessened. When you are ready for a re-dye, just concentrate the products on the roots and not on your pre-lightened/dyed hair.
If you’re using normal shampoo, grab one without sulfates as they will strip the color out slowly. Most shampoos “for colored hair” should work, but keep in mind that they WILL still fade regardless of the shampoo you use.